BioSteps 10 Filter Parts
The Inlet Fitting at the top of filter is a clear threaded connector with an O-ring and a black nut. The clear fitting is a unique fitting. It has male threads on the outside and female threads on...
The Outlet Fitting is located in the filter at the opposite end of Inlet Fitting. It includes the nut, an O-ring and the outlet connector. Always install the O-ring on the inside of the filter...
The Drain / Waste Fitting is located on the bottom of filter tank. It includes a barb with threaded plug , 2 O-rings and a nut. Use one O-ring on each side of the filter tank. The plug end is a 1"...
Easy to replace your old media with our pre-cut sheets ready for drop into the BioSteps.
Available in green density, blue density, gray density.
Old style BioSteps used a piece of soft open cell...
The Stainless Steel Bracket is an optional brace. It can be installed across the top of the BioSteps 10 filter in order prevent bowing of the filter tank walls. This helps hold the walls tighter...