Bio-filters are full of live micro-organisms. Filter media are the bearers of this life. Over-zealous cleansing or purifying the filter media will unbalance the filter ecosystem by eliminating or killing this essential life. Disinfecting or drying of washed media only makes sense in cases where the whole pond needs to be disinfected or dried out.
In essence, cleaning a bio-filter should be only done with the intention to:
Use a submersible water pump with a hose of sufficient diameter and pour a good volume of pond water over the media.
OR
Pour a full bucket of pond water over specific sections of the filter media.
OR
Temporarily remove 2 sheets of Matala® and shake the remaining sheets up and down in the filter tank; drain the chamber.
OR
Remove the media from the tank; dirty water falls off; drain chamber.
Important Notes:
- Eliminate excessive organic waste (fish excrements, excessive food, plant remains) from the first section of the filter (sedimentation chamber, vortex, etc…). Such need to be done more often to avoid putting an extra burden on the real bio-filter.
- Rinse out excessive detritus or accumulated bacterial flock from the latter section of the filter to avoid plugging of the filter media, which would create adverse anaerobic conditions.
- Improve the living conditions of the nitrifying bacteria and micro-organisms that thrive in the bio-filter.
To clean the real bio-filter section: “Use volume – no pressure”
Create handles with strapping material in order to remove R-Matala from chamber easily.
Matala® cleans very easily by the following methods:
- Remove media only if strictly necessary; The above picture proves Matala® releases its dirt quite easily.
- It is okay to gently tap the media on the ground to dislodge the dirt.
- Over zealous cleaning is not necessary and will lose too much bacteria. Keep it gentle.
- Shake the media up and down in the filter tank; drain chamber.